DIY Modern Desk
This is the cutting diagram used to make the desk, the grey is cut from 3/4 plywood and the green from 1x2x8 boards. The black represents the off-cuts.
DIY Bar Stool
This is the cutting diagram I used to make the stool, the red pieces were cut from a 1x4 board, the white from 2x2's, and the green from a 1x12. The dark grey represents offcuts.
DIY Floating Nightstand
This is the cut diagram I used to make the nightstand. Everything is cut from 3/4 plywood.
DIY Wooden Mallets
This is the cut diagram I made and used to make these two mallets.
The black is cut from 1/2 wood and white is cut from 3/4
DIY Modern Desk
This desk is modern looking, and is simple to make. It can be made with a circular saw, but a miter saw makes the job a lot easier. The zig-zag chair I made recently works perfect with this desk.
Materials(Affiliate Links):
- 2 Select Pine 1x2x8's
- 1 Select Pine 1x3x8
- Ikea Linnmon table top
- #8x1.5 Wood Screws
- #8x2.5 Wood Screws
- Wood Glue
- Wood Filler
- Shellac or Finish of Choice
Tools I Used
Plans:
DIY Zig-Zag Chair
This zig-zag chair is a simple but modern looking chair design that is very unique. It can be be built with limited tools and supplies and you can make 3 from one 4x8 sheet of 3/4 plywood.
